Milwaukee 9072-20 1/2-Inch Impact Wrench

Milwaukee 9072-20 Summary

The little brother in from Milwaukee

Product Description

The Milwaukee 9072-20 is the lower specification device of the two electric wrench drivers produced by the brand in the 9072 range. That however also means that the price is lower. This version features a Quik-Lok cord which is convenient when using in and about the house. It also features a pin-detent system which is designed to securely retain sockets or adapters during transportation and storage reducing the possibility of damage caused to the tool.

The 9072-20 is capable of 300 foot-ponds of torque which is the same as its brother in the Milwaukee range and provides this torque in two directions of forward and reverse. The variable speed motor is capable of spinning at 1,800 RPM with no-load attached. It is fully rated and capable for drilling applications or driving in and out lag-bolts. Power to weight ratio is good and achieved from a 7.0 amp motor drives a unique impact mechanism. The special mechanism achieves desired installation torque faster and loosens rusted or fretted bolts in less time. The tools weight is 6 pounds and it stands 11.5 inches tall.

U.S.A. Cordless: No, Max. Torque (ft.-lbs.): 300, Impacts Per Minute (IPM): 1,000-2,600, Drive (in.): 1/2, Speed – No Load (RPM): 1,800, Reversible: Yes, Amps: 7, Volts: 120, Battery Included: No, Charger Included: No, Tool Length (in.): 11 5/8, Tool Weight (lbs.): 6.0

Details of the Milwaukee’s 9072-20

  • 300 foot-pounds of torque
  • 7 amp motor drives unique impact mechanism
  • 600-1800 RPM on load speed
  • AC-only variable speed reversing switch with speed setting dial
  • 10-foot quik-lok 2-wire cord

The Recommendation for the Milwaukee tool

This product does not produce the largest power and torque for its range but has a good power to weight ratio. It is considered as a budget 1/2 inch tool that will get the job done. The reliability of the 9070-20 has been questioned in the past so its worth investing in insurance or ensuring that a warranty is obtained at purchase. It is not ideal for every day constant use but will be good for around the house and occasional domestic use.

Although it is a budget model, it is advisable for frequent tool users to spend an extra 15% and buy the best model in the electric impact driver range, the DW-292K.

New From: $188.79 In Stock

Comments Off

Milwaukee 9072-22 – 1/2-Inch Impact Wrench with 6 Sockets

Milwaukee MIL9072-22 Summary

The big brother of the Milwaukee range

Product Summary

The Milwaukee 9072-22 is the bigger brother to the 9070-20. It boasts most of the features of the 20 but with added durability and reliability that is achieved from a slightly redesigned mechanism that delivers a greater operating torque range and smoother operation thus creating less wear and tear in the internal mechanisms of the toolIt is a 1/2 inch square drive impact wrench and includes a set of six socket and a convenient carrying case to keep the tool secure. The 7.0 Amp motor is powerful enough to deliver a head speed of 1,800 RPM. It hits the scales at a weight of just 6.0 lbs whilst delivering 300 foot-pounds of torque which gives this wrench an excellent weight-to-power ratio. This model features a QUIK-LOK® cord and pin-detent system to securely retain sockets or adapters. The ergonomically shaped handle and soft cushioned grip create a well-balanced and controllable feel.

Milwaukee MIL9072-22 Specifications

  • 300 foot-pounds of torque – shaves time off of your work
  • Powerful 7.0 amp motor
  • Operating speed range of 600-1800 RPM
  • AC-only variable speed reversing switch with speed setting dial
  • 10-foot quik-lok 2-wire cord
  • Limited warranty

The Consensus on Milwaukee’s big brother

The jury is out on the Milwaukee 9070-22. It claims to be a better all round product than the 9070-20 which makes us ask why Milwaukee would enter two products that are so similar into the same market. All that we can find as being different between the two is a slightly altered drive system and a more durable casing. Milwaukee are certain that this is worth a $40 difference in price between the two tools but we are not convinced.

The advice from Trusted Tool Advisor is to spend the extra 15% and purchase the DeWalt DW-292K model which is a better branded name and has better features.

List Price: $199.49 USD
New From: $199.49 In Stock

Comments Off

DEWALT DW292K 7.5 Amp Impact Wrench with Detent Pin Anvil


DEWALT DW292K Summary

The ultimate electric corded wrench driver

Product Description

DeWalt are in the top 3 brands globally for electric powered tools. They produce high quality tools that are well designed and have the power to perform most jobs. The DW-292K is an electric driver that can deliver 345 foot-pounds of torque by simply plugging it in to the mains and driving which makes it ready to take on even the toughest fastening jobs. It also puts it inline with some of the air powered torque wrenches in terms of power.

The DeWalt is a heavy-duty 1/2-Inch Impact Wrench which is made easy to handle thanks to the effort that was spent developing it by DeWalt. It is powered from a 7.5 Amp motor and has various head connection possibilities which makes it suitable for a range of applications. Simple screwing and ratchet jobs such as deck building to the more complex plumbing fixture installation are all possible with the DW-292K.

The reliability of this driver covered by warrantee. It also includes a patented anvil design that provides a detent pin for secure socket retention, increased strength and long-term durability. The control system is convenient and ergonomically designed incorporating a well-balanced body and a soft comfortable grip for improved accuracy and reduced operator fatigue. This is someting which you will appreciate after a long day performing repetitive tasks. This kit comes with a heavy-duty kit box that protects the tool during transport and makes storage easy.

Exploring the DEWALT DW292K Features

  • 345 foott-pounds of torque in forward and reverse
  • 7.5 amp motor drive syste,
  • Reliable and Durable DeWalt product
  • Soft grip allows for superior ergonomics
  • Ball bearing construction for increased durability;

The Public Consensus of the DW292K

This DeWalt tool is a good electric driver that will deliver a high level of power for an electric tool. Comparison against air powered tools should be avoided as inevitably air powered tools will be more powerful and more heavy duty. The DW-292K leads the market for electric impact wrench drivers.

However, the price of the tool may deter those domestic users that are looking for an electric driver for occasional use. Kawasaki produce and sell an electric driver for around a quarter of this price of this one and will obviously lack in power and features in comparison but is a snap of the price.

List Price: Too Low to Display
New From: Check Amazon For Pricing In Stock

Comments Off

Heavy Duty Torque Wrenches

Which Heavy duty air wrench is the best for you?

Heavy duty impact wrenches are most likely to be seen in manufacturing factories and large construction sites. Some auto mechanics do choose to use heavy duty air powered impact torque wrenches however, they are not a requirement in this specific industry due to the huge power output that they are capable of and the relatively low requirement in the auto industry.

The top end of the air powered torque wrench market is predominantly 3/4 inch and 1 inch male drive shaft connections. These tools are the most expensive torque wrenches that are on sale all over and should therefore be explored to ensure that you are making the correct purchase. They deliver maximum torque levels that aren’t seen in small devices and vary in size from a slender and flexible device to bulky tools that limit the application.

The Best for Daily Use

If you are looking for a product that is a good mix of maximum torque raw power and reliability and assurances that you will not be let down, the IR2141 cannot be beaten. It delivers and unprecedented 1,200 foot-pounds of torque for a machine that weighs just 7 pounds and stands just over 8 inches tall giving the IR2141 the title of the highest pound to weight ration in the class. Its reliability cannot be beaten and its extremely rare for owners to require using their warrantee.

The Best 1 inch Model

The category of heavy duty air powered impact torque wrenches is fairly much dominated by the Ingersoll-Rand products. However, the wrench that takes the title of best 1 inch model is not an IR tool. The best 1 inch is the Chicago Pneumatic CP7775-6 which delivers an astonishing 1,550 foot-pounds of torque which ensures that you can complete any job.

The Best All around Model

Ingersoll-Rand have two budget products that fall into the heavy duty air powered torque wrench category; one 3/4 inch male drive shaft connection and one 1 inch. However, the best all round for a budget model is the IR-261. It can deliver over 1,100 foot-pounds of torque which is enough for most applications and is still a relatively sleek design.

Comments Off

The Ergonomic Ingersoll-Rand IRT285B-6 Heavy Duty Pneumatic Impact Wrench

Ingersoll-Rand IRT285B-6 Summary

Design with the user in mind for easy use

Product Description

The Ingersoll Rand RT285B-6 is a 1-Inch Pneumatic Impact Wrench with very attractive price and some great features that we have come to expect from IR products. It does however compromise on size and total weight from huge power and features that it provides.

It is built with a robust 6-vane air powered motor mechanism which is fully capable of delivering a maximum torque of up to 1,450 foot-pounds. This is achieved with a free no-load speed of 5,000 RPM. As mentioned, the wrench is a cumbersome device and weighs 27.3 lbs and lies at a long 20.1 inches. The average air consumption required to power the wrench is 10 cfm which is on the high side and requires a higher specification air compressor than most. The output sound levels are also on the high side with a range of 107/120db.
Although, being larger than most heavy duty torque wrenches, the IRT285B-6`s design has been designed with ergonomics in mind. It features body parts such as an ergonomic swept-back side handle which allows for easy two handed operation. The 3 position power regulator switch is in the perfect place and is axactly where you would expect it to be and the “angle-down” exhaust system improves user safety. The touch trigger is sensitive to give the user greater control and the 6 inch extended anvil improves manoeuvrability in tight spaces.

Ingersoll-Rand IRT285B-6 – Finest Details

  • 6-vane air motor mechanism
  • 1,450 foot-pounds of maximum torque
  • Speed: 5,000 rpm
  • Inlet to prevent hose kicks
  • Six-inch extended anvil for better manoeuvrability

Our thoughts on the IRT285B-6

Although not being the cheapest in the heavy duty class of ait powered torque wrenches, the IRT285B-6 boasts some of the best features for a highly competitive price. It is by far the best budget 1 inch heavy duty tool and the ergonomic design allows for extreme comfort and ease of use. Other advantages of the IRT285B-6 are its design and high power to weight ratio and its extended control system features.
However, the IRT285B-6 is not a small product and is therefore not for every one. The 1,450 ft-lbs of torque is more than enough to dispatch most nuts and bolts however, some users are reporting reliability issues with the product. This is a small minority and most owners of the IRT285B-6 are fully satisfied with their purchase. Its worth getting an extended warranty to cover this issue.

Another budget heavy duty air power impact wrench is the IR261 which features a 3/4 male drive shaft connection. This product is around $40 cheaper and although it lacks in power, it also weighs less and is smaller allowing for better flexibility in tight spaces.

List Price: Too Low to Display
New From: Check Amazon For Pricing In Stock
Used from: $262.26 In Stock
Release date November 15, 2013.
Comments Off

Which 1/2″ Air Impact Wrench is the Best?

1/2″ Air Impact Wrenches

Air Impact Wrenches are used in many different industries with the most predominant being trades such as auto-workshops and construction projects. The manufacturing and ship building industries are also likely to be constant users of air powered ratchet tools.
The middle of the range air powered ratchets are those that are powered by 1/2 inch air hoses. These tools are middle powered and middle priced and therefore the majority of industries would be looking for tools that sit in the 1/2 inch air hose compressor range. They also have the added advantage of having high torque power whilst being small and slender in their stature. They are therefore the best for use on busy jobs where the worker does not have the time for messing around or the space for moving tools around easy.

The Best for Daily Use

The absolute best air powered torque wrench that is available with a 1/2 inch air hose connection is no surprise. Ingersoll-Rand pride themselves on making the very best tools for everyday use. That is the main reason why Ingersoll-Rand tools are the first choice for the majority of Nascar teams. The IR-2135 is not cheap but is certainly the best tool for every day users. It is reliable and will not let you down when you need the power. It also delivers the highest torque in the market of 1/2 inch wrenches.

The Best Extreme Budget Model

An extreme budget model is classified as one that is massively cheaper than the standard price for the class. The Campbell Hausfeld TL050299AV costs 8.5 times less than the best performing air powered ratchet tool in the half inch tool market. It costs just $30 which is a tiny price and places it into many peoples consideration. The Campbell Hausfeld TL050299AV will not be as durable and reliable as the more expensive products but there is no reason why this shouldn’t be purchased by a home mechanic that will use the tool very lightly.

The Best All around Model

The best all around 1/2 inch air power torque wrench title goes to an up and coming brand in the air powered tool marking. Aircat have seen steadily increasing sales and their latest model, the AirCat 1000, is set to propel them even further. It is also great for those that dislike Ingersoll-Rands strangle hold on the air powered tool market. It is a small and lightweight device and boasts almost as much torque as the best performing Ingersoll-Rand 1/2 inch product for over $100 less. This is a great product and should be considered by those that will use on a medium to high basis.

Comments Off

Ingersoll-Rand 261 3/4-Inch Super Duty Air Impact Wrench

Ingersoll-Rand IR-261 Summary

Middle range with great top end power

Product Description

Ingersoll-Rand’s middle of the range heavy duty tool is the IR-261. It is a 3/4-Inch Heavy Duty Air Impact Wrench that claims to be in the style of a compact tool. This wrench is almost 9 inches long which does not make it the most compact in the class of heavy duty air powered torque wrenches. It also sits on the scale at a total weight of 12.4 lbs which again questions the meaning of compact as this tool is over double the weight of the lightest heavy duty air powered torque wrench.
The IR-261 requires an air consumption of 9.5 CFM which means that a high end air compressor is required. It does however converst that air consumption in to a huge 1,100 lbs/ft of maximum torque whilst obtaining a head speed of 5,500RPM with no-load attached. The drive control features variable speeds in forward motion as well as in reverse. The tool can be set to deliver 1,000 hammer impacts per minute or used as a torque wrench with a working torque of between 200 and 900 lbs/ft. The IR-261 wrench also features like a very convenient handle exhaust which allows debris to be aimed away as well as a low noise level output of 98.1dB. The mechanism is also very durable and is built with pressure-feed lubrication system.

Ingersoll-Rand IR-261 Features

  • Heavy-duty, Ingersoll-Rand Product
  • Jumbo hammer mechanism
  • Maximum 1,100 lbs/ft of torque
  • Trouble-free performance aided by the pressure-feed lube system
  • Weighs 12.4-pounds and stand 9 inches tall

The Recommendation to purchase the 261

The category of heavy duty torque wrenches contains some heavy hitters and big players all with matching price tags that would scare off most consumers. The IR-261 however, does not. It is the lowest price in the category but does not skimp in anyway on power and is still fully capable of producing over 1,100 lbs/ft of torque which is enough to take care of most jobs.

It has good durability and is backed up by the built-in pressure-feed lube system to increase the life span of the tool. The ergonomic engineering design allows more precise and comfortable work process. This is very popular budget tool, which is suitable for heavy home to medium commercial use. IR-261 is simply one of the best balanced products in its class, and you will not go wrong by purchasing this wrench.

The air hose connection is a 3/4 inch and the torque produced from this is extremely high. However, some sites and companies will not provide 3/4 inch air pressured hoses. If you require a 1 inch air powered torque wrench, check out the IR285B.

List Price: Too Low to Display
New From: Check Amazon For Pricing In Stock
Release date June 7, 2013.
Comments Off

Ingersoll-Rand 2141 3/4-Inch Ultra Duty Air Impact Wrench

Ingersoll-Rand IR-2141 Summary

Best Man for the job has to be an Ingersoll-Rand

Product Description

Ingersoll-Rand dominate the market for most categories of air power torque wrenches with their variance of air hose connection size. The IT-2141 is certainly battling to be the most heavy duty torque wrench available in any category on the market. The 3/4 inch hose connection is the first indication that this tool is an absolute beast. The tool requires a huge air consumption of 9.6 CFM. The torque that is produced is 1,200 lbs/ft which is available in both forward and reverse motion. This enables new nuts and bolts to be replaced at the same level tightness as the ones that other tools will struggle and fail to get loosen.

The Ingersoll-Rand IR-2141 is the most compact 3/4-Inch Heavy Duty Air Impact Wrench. It stands just over 8 inches. This is combined with a weight of just 7lbs making this tool a piece of tool engineering excellence. The winner of this tool manufacturing is the consumer that can benefit from the full power of a huge tool with the size of a compact wrench.

A no load speed of 8,000 RPM is also amongst the highest of the air powered tools on the market.. The control system features dials for variable speed and allows for full power in reverse. It also supports four power modes that are achieved by redirecting the airflow which comes with easy controls. This tool is ergonomically designed featuring contoured professional touch trigger and ergonomically designed handle for increased comfort. Working with this wrench is pure pleasure.

Ingersoll-Rand Specifications for the IR-2141

  • Twin hammer plus mechanism for 30 percent greater durability
  • Contoured professional touch trigger and ergonomically designed handle for increased comfort
  • Provides a massive 1200 lbs/ft maximum torque
  • Weighs just 7 pounds
  • Only 8.2 inches long

The IR-2141 Conclusion

Most people in the construction and mechanic industry know what to expect from Ingersoll-Rand product nowadays. This, however, does not stop IR from producing some of the highest quality tools in the world today. The price tag does reflect the quality of this tool and perhaps is on the high side. It will probably be out of reach for most auto mechanics and construction workers.

It is the ideal tool for those that require high powered tools all day every day. The Ingersoll-Rand quality is sure to shine through and reduce failure rates whilst delivering high power for the duration of jobs. It also provides great balance between power and size which will reduce the stress on your hands and wrists. Additionally, the ergonomically designed handle will allow more comfortable and precise work.

The price of this product will deter many. However there is an alternative with similar high power for a slightly lower price. That is the Chicago CP77756.

Comments Off

Meet the biggest Impact wrench – The Chicago Pneumatic CP77756

Chicago Pneumatic CP7775-6 Summary

The biggest and most powerful torque wrench

Product Description

The Chicago Pneumatic CP7775-6 is a heavy-duty air impact wrench with an awesome maximum torque that is guaranteed to move most things that cross its path. This wrench is capable of producing an amazing 1,550 lbs/ft of torque. This level of maximum torque puts the CP7775-6 at the top of its class for maximum torque by over 300 lbs/ft.

The down side to this incredible power is the ergonomics of the tool it weights in at 25 lbs and stands a height of over 20 inches. This limits its usability and operational qualities by simply being to big and heavy to operate with a single hand or in tight places. It can therefore be said that this tool is designed with the large construction job in mind where space and weight are not issues.

The Chicago Pneumatic CP7775-6 also features a variable speed control valve system which include a reverse gear at full speed. The torque level is controlled by an easily accessible four step switch. The no-load head speed is 5,300RPM with average an air consumption of 8.7 CFM which is lower than some of of the CP7775-6’s competitors that don’t compare on power. The hammer mode can produce a maximum of 750 Impacts Per Minute. The CP7775-6 directs exhaust air away from the operator and is designed with an over-molded side handle for greater comfort and full control. The wrench is designed good enough to allow you handling those 1550 lbs/ft

Chicago Pneumatic CP7775-6 Details

  • 1550 lbs/ft of pure torque
  • Big and beefy at 25 lbs and 20 inches tall
  • Directs exhaust air away from operator and work area
  • Four position power control in forward and reverse
  • Air consumption of 8.7 CFM with 1 inch hose connection

The Conclusion to buy the heavy duty wrench

Chicago Pneumatic CP7775-6 by far and away the most powerful heavy-duty air impact wrench in its class. It boasts a ridiculously huge toque and head speed, it will get the job done fast and efficiently. However, the 1,550 foot-pounds of torque is rarely required so this tool is recommended for those that like to have the most powerful toys and tools or for those that truly need a high powered device such as this.

The body of the tool is large and perhaps too big for most applications. It will simply get in the way of itself during work and could possibly hold work up. The price is not cheap either at almost $600.

This tool is a great product for those that will make full use of the torque but is not ideal for an every day using tool due to its size. The IR2141 is roughly 15% more expensive but is less than half the size and a sixth of the weight of the Chicago Pneumatic CP7775-6.

Comments Off

AirCat 1000-TH Composite Air Impact Wrench With Twin Hammer

AirCat 1000-TH AIR Summary

Expensive…but is the 1000-TH Air worth the price tag

Product Description

The Aircat 1000-TH Air comes with a fairly hefty price tag so what you need to know is, does the product justify the money? In the advertisement summary, Aircat tells us all about the advanced technology that they have designed into the 1000-TH Air. They have obtained an exclusive patent on the thru-handle exhaust and muffler and filter technology. This system enables the tool to operate at full power while maintaining a steady drive for the duration of the job.

Producing a maximum torque of 1,000 lbs/ft also makes this tool on of the big boys in the market. This is the kind of power that will address any tight bolt problem that you may come across. It also claims a low noise output meaning that staff and neighbors will not be deafened by the high torque working its magic. The control system puts 3 speeds of high torque straight into your hand with a twin hammer mechanism to maximize the output delivered to the nut/bolt.

Spinning at 7,000 RPM makes this machine is a beast and the clutch mechanism helps to not overwork the internal systems which helps the tool last longer without diminishing performance. The AirCat 1000-TH Air weighs a little over 4 pounds which makes it one of the lightest tools in the 1/2 inch air powered torque wrench range.

Listing the AirCat 1000-TH Air’s Features

  • Strongest 1/2-inch drive impact in its class
  • Durable limited edition camouflage composite housing
  • Patented technology to reduce noise(86 dB)
  • Twin hammer mechanism that will not leave bolts short
  • Reduces operator fatigue thanks to patented exhaust system
  • Safe operation thanks to exhaust directing debris away

General Consensus for the AirCat

The jury definitely agreed on the AirCat 1000-TH Air. It is a great product that boasts features that rival and beat some of its competitors. It is also priced extremely attractively for the overall product that you get. It is torque for dollar the best rated in the market for 1/2 inch drive air impacts. Spinning at 7,000 RPM with torque in the range of 1,000 lbs/ft is rare in air powered torque wrenches that are priced this low.

Its hard to find negatives other than that Aircat is less well established in the air powered tool industry as some of the alternative, and as such may be considered an unknown company to buy tools from. However, the 1000-TH Air may just prove to be the coming of age for Aircat.

There is just one product in the 1/2 inch drive market that beats the Aircat 1000-TH on power and that is the IR2135.

The nearest Ingersoll-Rand product on price is the IR231C which is well down on power in comparison.

List Price: Too Low to Display
New From: Check Amazon For Pricing In Stock

Comments Off

Roll up and see the $30 Campbell Hausfeld TL050299AV Impact Wrench

Campbell Hausfeld TL050299AV Summary

For those that want to pay less than a meal

Product Description

The TL050299AV is an extremely budget 1/2″ Air Impact Wrench from Campbell Hausfeld. The price of this wrench is very attractive and amazingly low. However, you will be paying for a very low performance device. This Air Impact Wrench produces 250 lbs/ft of torque. This level of torque will probably suffice if all that is required is to remove spark plugs. However, when it comes to larger bolts and nuts that have been secured on as tight as a old oak tree is in the ground. The TL050299AV does not have the power to perform every task but at just $30 would be a good addition to a domestic tool box where high powered jobs are unlikely.

The air consumption required is 5.1 SCFM at a pressure of 90 PSI which is fairly standard for a 1/2 inch hose connection but is quite low for the power output that is achieved. There are four power speed modes: Full, medium, low power forward speeds and one Full-power reverse. The speed and direction controls are operated by an easily accessible “one-hand” switch. This product has a lot of features and even comes with a storage case. However, the lack of power is puts the TL050299AV largely in the market of domestic infrequent usage only..

Campbell Hausfeld TL050299AV Features

  • Low Price Low power tool for infrequent
  • Delivers 250-Feet lbs. of torque
  • Easy push button to control tool
  • One-handed directional changes
  • Air consumption 5.1 SCFM at 90 PSI

Our Experienced Recommendation

The TL050299AV is a great tool for auto mechanics that do not require heavy usage and heavy work load. The power output is high enough to be able to deal with spark plug removal and tightening easily. It will also dispatch tyre bolts with no problem too. It is when the required loads get much higher than this that the TL050299AV will struggle. It will also make hard work of being used full time every day.

It comes with a 3-inch extension and a reversable 3/4 – 13/16 socket, which are especially useful for that purpose. Just don`t expect miracles from this tiny 250 lbs/ft Air Impact Wrench. Everything is acceptable at this price range, except the torque – it is just not enough.

If you are willing to pay more for a torque wrench then do so. You will get more torque for your money. The IR236 is another good low price tool that will offer more torque and head speed.

List Price: $39.99 USD
New From: $38.40 In Stock

Comments Off

Ingersoll Rand 236 Air Impact Wrench

Ingersoll-Rand IRT236 Summary

it’s a lightweight use Ingersoll-Rand tool for light use

Product Description

Ingersoll-Rand’s 1/2 inch 236 is a rugged air powered torque wrench that sits roughly in the middle of the range and to the lower end for an IR’s tool. It is built to the high standards of IR quality but may be slightly lacking in the maximum power. The power output from the IR236 is a maximum of 450 lbs/ft with an operating torque of around 375 lbs/ft. The IR236 also comes with a large operating range of torque that allows it to be operated down to just 20 lbs/ft.

The IR236 requires an air consumption of 4.3 CFM which therefore means that the air compressor requirements are slightly higher than some of the other ranges of tools but a 4.3 CFM is fairly standard for the power output that is achieved from the IR236. The control system allows for a variable drive allowing quick acceleration and braking of the head speed which spins at a maximum no load speed of 7,400 RPM.

Weighing in at 5.3 lbs makes the Ingersoll-Rand 236 an average weight in its category. The length is also fairly standard at just over 7 inches. Something that stands out as a big advantage of the IR236 is the noise level that is produced by the tool working on full load. It will emit just 90.3 dB which is low for power that is produced.

The Specifications of the Ingersoll-Rand IRT236

  • Maximum torque of 450 lbs/ft
  • No Load speed of 7,400 RPM
  • Variable speed control system
  • Noise level of 90.3 dB
  • Weighs 5.3 pounds and measures 7 inches

The Conclusion on the IR 236

This is by no means the cheapest 1/2 inch air hose connection pressure powered tool available but being an Ingersoll-Rand means that the quality of the product is more likely to be of a higher order than other cheaper models. The size and weight of the IR236 are standard for its range. The design of the handle grip has had a lot of time and effort spent on it to ensure that the user gets a good operating experience.

The price of the tool is just a little lower than the next specification one in the Ingersoll-Rand range which puts this tool in the category of being the best IR product for those looking for a product to use very lightly.

If you are looking for a more beefier product, the IR2135 is around 2-3 time more powerful. However, this product comes with a large price tag. A similar tool that has a much lower price is the TL050299AV.

List Price: $171.00 USD
New From: $92.50 In Stock

Comments Off

IR231C Super-Duty Air Impact Wrench

Ingersoll-Rand IRT231C Summary

Big and tough at a cut price… for an Ingersoll-Rand

Ingersoll-Rand IRT231C Product Description

There is nothing new about the IRT231C as it was first introduced 25 years ago. Ingersoll-Rand have continuosl improved this 1/2 inch air hose connection tool over the years to make it what it is today. It is the daddy of the Ingersoll-Rand range and it certainly holds the title with great honour. As it is the most grown up product in the Ingersoll-Rand range, it or course has to be packed with power. 425 lbs/ft of torque to be exact. This puts it at the top end of the air powered tool range.

A no load speed of over 8,000 rpm also makes it one of the speediest in the air powered tool range. It weighs a competitive 5.3 pounds which is by no means a lightweight device but its also not an elephant to use. The dual direction motor provides an equal power in both forward and reverse. Ingersoll-Rand also equip all of there product with the very besy pressure trigger that gives the users total control of the wrench head.

The designers at IR have been busy making sure that their products are ergonomically sound and the users requirements have been taken fully into accout with the IRT231C. The tool is a total of 7.2 inches long and has been designed to reduce the vibrations that are sustained to the wrists of the users.


Defining the Ingersoll-Rand IRT231C Features

  • Multi speed power regulator
  • Wrist Friendly ergonomic design
  • Ingersoll-Rand durability
  • Maintenance free
  • Competitive price
  • Twin Hammer Plus impact mechanism


The Consensus on the Ingersoll-Rand IRT231C

The IRT231C provides one of the best performance/price ratio inthe 1/2-Inch air powered impact wrench`s market. After 25 years of constant improvements, IR have tweaked IRT231C many times and have now developed a solid product to be proud of. It has proven its durability, and it is very easy to service. This device provides enough torque for all medium usage tasks in a small and ergonomic body. If you need a reliable, powerful, and easy to use air impact wrench, then the choice is obvious.

The 2135TiMAX is another Ingersoll-Rand product but one that is twice the price of the IRT231. It does however boast a bigger torque and faster speed for a smaller and lighter device.


List Price: Too Low to Display
New From: Check Amazon For Pricing In Stock
Used from: $100.32 In Stock

Comments Off

The best Air Powered Wrenches in a ratchet form

The most common place to see air powered torque wrenches are in garages and manufacturing/construction sites. These are typically places that are rather constrained in terms of the space that they have to operate in. For example, an auto mechanic will often spend a lot of his time with his head in the engine department of a vehicle.

They will therefore need the right tools for the job and to choose the right tool, there first consideration has to be the space and area that the user had to work in. Air Powered torque wrenches that are in the form of a conventional ratchet allow for those in these industries to have the right size and shape tool for the job. They also have the huge added advantage of being powered from air which arguably makes the usability of air powered torque wrenches shaped like ratchets the best shape and easiest

The Best for Daily Use

The ultimate air powered torque wrench for those that will make full use of the power, the Ingersoll-Rand 109 is the man for the job. Being an Ingersoll-Rand, you will not be let down on the build quality or through reliability issues. It is also the highest performing in this range but is also the most pricey.

The Best Budget Model

For those looking for an air powered torque wrench on a budget, the CP866 is the one that you want. It is made by Chicago which is another bog name in the air powered tools market and is also a well known brand for reliable products. It comes for around half the price of the IR109 but lacks around a quarter in power output when head to head.

The Best Model for Light Use

The best torque wrench in the form of a ratchet that is intended for light use is incredibly made by Ingersoll-Rand. The PF700 is truly a great product for the price. Although it comes with a lower product specification than some of the others in the range, the Power Factor 700 is definitely the best quality of product per dollar!

Comments Off

This is the Campbell Hausfeld TL1017 Butterfly Impact Wrench

Campbell Hausfeld TL1017 Summary

meet the strange looking but powerful and cheap TL1017

Product Description

The Campbell Hausfeld Butterfly Impact Wrench is most definitely the strangest looking of the impact torque wrenches in the field of ratchet formation but this means nothing in the tool world. What does matter is the 75 lbs/ft of torque that is produced from this beast. Nuts and bolts have no chance of staying on with this kind of power that is delivered in impacts 800 times a minute. This kind of power will ensure that no bolt will hold up your job and cause costly delays which are a huge irritant for busy workmen and women.

The Campbell Hausfeld TL1017 is a butterfly impact torque wrench and prices in at possibly the lowest price that you will find an air powered wrench for anywhere. It also drops in as the lightest product in the category of wrench in the form of a ratchet weighing just 2 lbs. This is great for those looking for a high torque yet lightweight device.

Campbell Hausfeld TL-1017 – The Specifications

  • Excellent choice for small fastener work in engine and body repairs
  • 75 lbs/ft of operating torque
  • 800 impacts per minute
  • Swivel air inlet connection

The Recommendations about this tool

The Campbell Hausfield TL1017 is probably has its best use for loosening spark plugs and tyre lugs rather than heavy duty and constant use on construction sites and loosening extremely tight bolts and nuts. The tool spins at one of the fastest for one of this type but Campbell Hausfield does not have the reputation for being a durable manufacturer of air powered tools as some of the other manufacturers do have.

The TL1017 does however make it easier and cheaper when an air compressor is needed. The air consumption of 2.4 scfm at a pressure of 90 psi is very low and therefore requires a small compressor saving your hard earned dollars.

The Ingersoll-Rand PF700 is a better all round product for a similar price but with a low maximum torque rating so we recommend that you spend the extra $30 and get the JSM-401.

List Price: $45.45 USD
New From: $45.43 In Stock

Comments Off

The Jet JSM-401 Impact Wrench with Butterfly Grip

Jet JSM-401 Summary

may not have be as durable as others but will have the umphhh to do the job

Product Description

The Jet JSM 401 has been described in the product literature are as a great addition to the tool box implying that the model is designed for home and domestic use only. However, looking at the product specification, the JSM 401 is capable of spinning at 10,000 rpm with no load. The maximum torque output during operation is 75 lbs/ft which puts it amongst the most powerful in the category of ratchet like torque wrenches.

The body is made from toughened aluminium making it only semi-tough and therefore not as durable as some of the more expensive models that are made from much tougher materials. There is also a built in regulator that will control the air flow through the tools internal mechanisms. The air hose connection is 3/8 inch with an inlet of 1/4 inch. The pressure require for operation is 90 psi.

Features such as front and rear bumper guards are good features for a low cost tool to have and increase the attractiveness of this product. The control system also has ring socket retainers installed which enables the user to rapidly switch sockets in and out increasing the productivity. The tool also consumes just 3 cubic foot of air per metre which allows the tool to be used with smaller compressors.

The Jet JSM-401 Details

  • 75- lbs/ft of torque
  • Capable of heavy-duty fastening and unfastening
  • Built-in air regulator for positive speed and torque control
  • Air consumption just 3 CFM
  • Designed for maximum comfort when operating
  • Butterfly control for easy direction changes

Judging the Jet JSM-401

The Jet JSM is a designed to be a middle range torque wrench in the shape and formation of a ratchet. The price of the JSM 401 is relatively high for a product of its nature. The body work also looks faily simple and capable of an easy failure should it take a big knock.

However, the JSM 401 can operate to full capability of 75 lbs/ft of torque which proves that it has muscle to get the job done. Something that us amazing is that the JSM 401 can work on full power and torque with an air consumption of just 3 cfm. This is a huge advantage as it allows the owners and operators to purchase smaller air compressors.

We recommend that this product only be bought for light use and not used for heavy duty or daily use. The Chicago CP886 is a better product for those requiring a tougher and more durable tool although it is down on power. A tool with similar specification but around half the price is the Campbell TL1017.

List Price: $100.00 USD
New From: $100.00 In Stock

Comments Off

Power Force by Ingersoll Rand – The PF700 Air Ratchet Wrench

Ingersoll-Rand PF700 Summary

It’s a lightweight Ingersoll-Rand product

Product Description

The Ingersoll-Rand PF700 is the cheapest of the air torque wrenches and the cheapest product sold by the brand. This is therefore a budget IR product but puts it in the same price bracket as other brands of air ratchet wrenches. For Ingersoll-Rand to release a product at such a low price shows that the company have ambitions to con

The Specification for the Ingersoll-Rand PF700

  • Maximum Torque – 55 lbs/ft
  • No load Speed – 160 RPM
  • Lightweight at just – 2.6 lbs
  • Air consumption of 4 SCFM

Our Perception of the Power Force

This product is for those that want to purchase a tool with the big brand name but pay the price of a corner street tool. It is amazing to see an Ingersoll-Rand product on the open market for just $39.

The PF700 s hugely down on torque and power compared to other in the class but Ingersoll-Rand would certainly not risk selling a product that could potentially damage their reputation by making it weak and un-reliable. Based on this fact, you can be almost certain that the PF700 will be a great tool and will not let you down when you need it.

If you are not bothered about the brand name, the TL1017 is a tool with a lot more umph for the same price.

Comments Off

The super Ingersoll-Rand 2135TiMAX Impact Wrench

Ingersoll-Rand IR 2135TIMAX Summary

The big boy half inch torque wrench

Product Description

Ingersoll-Rand are at the peak of the tool manufacturing industry and their 1/2 inch torque wrench is at the absolute jewel in the crown of their range. The IR 2135TiMAX is one of the most priciest torque wrench but the question that has to be asked is whether its worth the $250 price tag.

The body of the IR 2135TiMAX impact wrench is made from high strength titanium which guarantees’ that this product will not fall apart after 5 minutes of use. The internal mechanisms also stand up to the extreme high quality of all Ingersoll-Rand products that the construction and auto mechanic industries have come to expect from all heavy duty IR tools. The 2135TiMAX boasts the largest power to weight ratio in its class. The torque produce is a maximum of 1,100 lbs/ft on no load. The operating torque is around 800 lbs/ft meaning that stubborn nuts and bolts simply don’t stand a chance.

This amazing power is delivered from a unit that weights just 3.95 lbs delivering over 250 lbs/ft per pound that the tool weighs. Ingersoll-Rand have also fitted the 2135TiMAX with their usual standard of high quality control system that gives the user full control of all of the torque available at the squeeze of a trigger. Testing and previous use of the 2135TiMAX has proven that the tool can operate all day long without failure.

The Ingersoll-Rand IR 2135TIMAX Details and Specifications

  • Extremely high reliability
  • Designed for comfort and convenience
  • Maximum torgue of 1,100 lbs/ft
  • Highest power-to-weight in class

Interviewing the IR 2135 TI MAX

The 2135TiMAX is the perfect tool for busy workmen and mechanics that can simply not afford for second class tools holding up jobs and worksites. The titanium body is tough as nails and ensures that you will not be let down. The control system is highly efficient and makes full use of the air power that drives the wrench.

750 lbs/ft of operating torque ensures that the power is at the end of your fingers exactly when you need it. The power system is second to none and will definitely impress the socks off of any hardened construction worker.

However, the price tag of $250 is certainly extremely high. IR also have two other air powered torque wrenches in the 1/2 inch hose connection range. Both are lesser specs but the IR 231C is half the price and IR 236 is a third the price of the 2135TiMAX.

New From: $568.78 In Stock
Used from: $412.00 In Stock
Release date June 7, 2013.
Comments Off

Meet the Chicago Pneumatic CP886 Standard-Duty Air Ratchet

CP (Chicago Pneumatic) CPT886 Summary

Great budget tool for small garages and high domestic use

Product Description

The Chicago Pneumatic CP886 is a middle of the range product that sits in the torque wrench category of being in the formation of a ratchet. This means that the ergonomic design of it will be very similar to all of the others in the range by Chicago are known for there increased detail to the end user and the ability to operate the tool.

The compact head design is perfect for working in tight spaces inside car engines or on small constructions sites where large tools are simply not possible. The CP886 the lightest air powered torque wrench that takes the shape of a ratchet. It weighs just 2.2 lbs which makes for increased flexibility and enables the tool to be uses with a single hand which is important when working in small compartments. The length of the tool is just of 10 inches which is the average length for a wrench of this type.

The speed of the Chicago CP886 is not as fast as others in the market at 160 rpm but this will only marginly slow your job down. The wrench delivers an operation torque of 50 lbs/ft which is relatively low for a tool of this type but will be enough to loosen the majority of tricky bolts and nuts. The air consumption is 4 CFM and the hose pipe connection required is a 3/8 inch.

Chicago Pneumatic’s CPT886 Features

  • Compact head design
  • More flexibility in tight spaces
  • Proven durability
  • Lightweight: 2.25 lbs. (1.1 kg.)
  • Length: 10-Inch (257mm)
  • Beautiful ergonomic handheld design

The Consensus on the Corageous CP886

The Chicago delivers a low power and torque output in comparison to some of its rivals in the air powered torque wrench ratchet sector of the tool market. However, the price of this tool is incredible in comparison. Chicago are a good brand name with a proven history of reliable products. All this works out to you being able to pick up a reliable tool for a small price.

Many auto mechanics rely on this tool daily to get their work done. Here at trusted tool advisor, we would say that this is the best of the budget market for air powered torque wrenches that take the form of a ratchet. Its low power, torque and head speed limit the uses of this tool in the auto garage environment and should therefore only be considered for budget garages.

For a high power and extremely durable tool, check out the IR 109XPA.

List Price: $129.00 USD
New From: $65.09 In Stock
Release date November 14, 2007.
Comments Off

The brilliant and durable Ingersoll-Rand 109XPA Air Ratchet Wrench

Ingersoll-Rand IRT109XP Summary

The wrench in a ratchet form that you want

Product Description

Ingersoll-Rand dominate the majority of the auto mechanic tool market in all classes of torque wrench size, power and air connection size. The 109XPA is a wrench that is shaped in the form of a ratchet for ease of use and there for fits into a separate category of torque wrenches. The Ingersoll-Rand 109XPA is the leader in this category.

The wrench itself is very clever. The mechanisms have an optimised gear ratio configured to optimise the airflow through the tool. This gives the user an increased performance output from the tool and can make all job simple. The power in torque that is produced is 70 lbs/ft which is the highest torque produced in any wrench of this similar formation and type. This torque is also delivered at an operational speed of 300 rpm making it one of the fastest torque wrench in a ratchet form on the market.

The tool itself is built to the now well known Ingersoll-Rand quality and is therefore extremely durable. The tool will be able to take a few bangs and still operate making it perfect for a busy garage environment. The tool suffers from the durability in weight and scales in at just 3.5 lbs putting the 109XPA amongst the heaviest in its class. Lying at 10 inches it sits in the middle of the category for the length. The control system allows for a variable speed in both forward and reverse direction allowing easy loosening and fastening of bolts and fittings.

Listing the Ingersoll-Rand IRT109XP Features

  • 76 ft/lbs. maximum torque
  • IR Twin Pawl Plus head design for exceptional durability
  • Amazingly durable
  • 360 adjustable exhaust directs air away
  • Easy to push throttle and variable speed drive
  • Sturdy and high power at 300 rpm

Whats the Consensus on the 109 XP?

The 109XPA from Ingersoll-Rand is the brands leading product in the market for torque wrenches that have the formation of a ratchet. This inevitably means that it comes with the highest price tag but also means that it will deliver the quality expected from all Ingersoll-Rand products. The drive system is extremely clever and allows for full use of the high torque that the 109XPA is capable of delivering. The durability of the tool housing and mechanism will ensure that this tool will last for multiple years before failing and it is extremely rare to hear of an Ingersoll-Rand product breaking.

This product comes highly recommended from auto mechanics that use air powered tools on a daily basis in auto garages. The durability and power ensure that the mechanics are not caught short when they need a reliable tool. Therefore, we also strongly recommend this tool for auto mechanics and by those in professions that require the use of a high quality torque wrench on a daily basis.

For those looking for a high quality and reliable product witout paying the high prices for an Ingersoll-Rand, check out this product Chicago CP886.

List Price: $113.62 USD
New From: $113.62 In Stock

Comments Off